Menu
Your Cart
  1. M-Audio BX8 Carbon

M-Audio BX8 Carbon

M-Audio BX8 Carbon
M-Audio BX8 Carbon
M-Audio BX8 Carbon
M-Audio BX8 Carbon
Προπαραγγελία
M-Audio BX8 Carbon
M-Audio BX8 Carbon
M-Audio BX8 Carbon
M-Audio BX8 Carbon
M-Audio BX8 Carbon
194,34€
Χωρίς ΦΠΑ: 156,73€
  • Διαθεσιμότητα: Προπαραγγελία
  • Κωδικός Προϊόντος: BX8 CARBON

BX8 Carbon

Overview

Professional Monitoring for the Professional Studio

The BX8 Carbon studio monitor helps you track, monitor, and mix with confidence by providing accurate sound and dynamic acoustic control. Equipped with a 8” woven Kevlar low-frequency driver and 1.25” natural silk dome tweeter, the BX8 Carbon delivers a flat frequency response, enhanced stereo imaging, and increased clarity for authentic, professional mixing. The bi-amplified 130 Watt Class A/B amplification means high power with less noise and ensures that your monitoring setup can handle today's modern music with ease.  With the BX8 Carbon, your music is ready for any listening environment.

Sweeter Sweet Spot

The tweeter’s waveguide has been enhanced to provide an expansive sweet spot and superior stereo imaging. A wider mix position gives you professional monitoring for any caliber studio. Pinhole-mounted LED placement cues help locate and light up the sweet spot to ensure a speaker placement that reliably translates stereo information and frequencies. When the LEDs turn bright, you know you’re dead center and ready to start mixing your sessions or laying down tracks with the BX8 Carbon.

Acoustic Control

Mixing doesn’t occur in a vacuum. Your listening environment influences your mixing decisions and, ultimately, the sound of your music. The BX8 Carbon's Acoustic Space Control, a series of calibration tools, helps provide optimal acoustic conditions for tracking, mixing, and monitoring anywhere. Adapt the BX8 Carbon to any mixing environment—from bedrooms to basements to professional studios—without compromising frequency detail or stereo image. The result is a flexible monitoring setup for the most demanding mixing environments.

Monitor Specs
Type 2-way near-field studio reference monitors
Low-Frequency Drive 8-inch (203 mm) Kevlar curved cone with high temperature voicecoil and damped rubber surround, magnetically shielded
High-Frequency Drive 1.25-inch (32mm) magnetically shielded natural silk dome
Frequency Response 38 Hz – 22 kHz
Crossover Frequency 2.2 kHz
Signal-To-Noise Ratio > 100 dB typical A-weighted
Input Connectors 1 x XLR balanced input connector 1 x TRS balanced/unbalanced input connector
Polarity Positive signal at + input produce outward LF cone displacement
Input Impedance 20 KΩ balanced, 10 KO unbalanced
Input Sensitivity 85 mV pink noise input produces 90 dBA output SPL at 1 meter with volume control at maximum
Protection RF interference, output current limiting, over temperature, turn on/off transient, subsonic filter, external mains fuse.
Indicator Power on/off indicator on rear panel
Power Requirements Factory-programmed for 115 V ~50/60 Hz, 230 V ~50/60 Hz, or 100 V ~50/60 Hz
Cabinet Vinyl-laminated high-acoustic-efficiency MDF

Ετικέτες: Studio Monitor