TYLER
The heart of the pedal is still the same essential filter sections, which splits your signal into different loops with HIGH PASS and LOW PASS paths both filters have a 12 dB/oct. roll-off with a variable cut-off frequency from 20 Hz to 3 kHz). The rest of the vital tonal organs have had a thorough upgrade, which has resulted in an improved noise floor too. So, let’s dive into everything that makes this pedal DELUXE.
Since the original TYLER was also used as an advanced AB/Y box by many, it was found that ground loops could occur - no more with TYLER DELUXE! Both SENDs are now transformer coupled (with TRIAD Magnetics) to give you a nice and warm saturation, while avoiding ground-loops (internal slide-switched ground-lift). To be prepared for almost every situation and every pedal, both loops also got their own phase inversion switch (+/-) to get rid of potential unwanted phase cancelation.
The next new must-have feature is there to ensure the transparency of your setup and because we know it's important to you and to us, we added the good old CLEAN blend.
So far so good, but the deluxe delights don’t stop here! A master phase-switch ensures a fixed and reliable interaction with your set filter-frequency in every situation, no matter if you either have a loop engaged or not. But wait, for all of you who wants to follow TYLER's evolution, we added another claimed feature. The LP-CUT and HP-CUT switches will now mute your loops when bypassed, which will give you tons of new options to be creative, by only using the engaged loops without having clean artefacts pass through when disengaging one of the loops.
Modern times brings modern needs, so TYLER DELUXE is now equipped with relay-based soft-switches, an internal step-up to increase the headroom for hotter input signals and low-noise op-amps to improve the overall sound-quality and usability.
Some examples of use: Bass players want to retain their low end while using their favourite fuzz or dirt pedal. Insert your dirt box in the highpass FX-Loop and adjust the cut-off frequency of the High and Low Pass to your needs. Dial in your preferred ratio of those Low and High Pass signals, engage the STEEL footswitch and you will never turn off TYLER again! You can also insert different modulation pedals, for example insert a lush phaser for the lows and a nice shimmering delay for the highs and TYLER will make it sound like two different guitars are playing at once. Mix up your modulation pedals with any dirt pedals, for a very pronounced and punchy sound all coming from one amp. If there ever was a Swiss army knife for your tone, then TYLER DELUXE must surely be it. So, fire up your frequency saw and start defining your own unique sonic path.
Powered by an optional standard 9V DC (max.) PSU (negative center, 2.1mm, approx. 100mA current draw)
Συνεχίζοντας την πλοήγησή σας στην ιστοσελίδα συνφωνείτε με την χρήση των Cookies.Δείτε τα CookiesΑποδοχή
Χρήση Cookies
Τι είναι τα cookies:
Τα cookies είναι μικρά αρχεία κειμένου τα οποία αποθηκεύονται στον φυλλομετρητή μας κατά την πλοήγησή μας στο διαδίκτυο. Σκοπός τους είναι να ειδοποιούν τον ιστότοπο που επισκέπτεται ο χρήστης, για την προηγούμενη δραστηριότητά του. Συνήθως περιγράφουν στοιχεία μας όπως όνομα χρήστη (user name) και συνθηματικό πρόσβασης (password) με σκοπό κατά την επίσκεψή μας στον ίδιο ιστότοπο αργότερα, να μας "θυμάται" και να μην χρειάζεται να κάνουμε login.
Διατηρεί τις προτιμήσεις του χρήστη σε εναλλαγή σελίδων
First Party
Εμείς
language
Διατηρεί τη γλώσσα που έχει επιλέξει ο χρήστης
First Party
Εμείς
currency
Διατηρεί το νόμισμα που έχει επιλέξει ο χρήστης
First Party
Εμείς
jrv
Διατηρεί τα προϊόντα που είδε πρόσφατα χρήστης
First Party
Εμείς
message_cookie
Εμφάνιση μηνύματος σχετικά με τα cookies
First Party
Εμείς
Περιγραφή
Τύπος
Διαχειριστής
Χρησιμοποιούνται για τη μέτρηση της επισκεψημίοτητας από τη Google
Third Party
Google
Χρησιμοποιούνται για τη προώθηση της ιστοσελίδας
Third Party
Sharethis
Χρησιμοποιούνται για τη μέτρηση της επισκεψημίοτητας από το Facebook
Third Party
Facebook
Περιγραφή
Τύπος
Διαχειριστής
Χρησιμοποιούνται για τη μέτρηση πωλήσεων από τη Google
Third Party
Google
Χρησιμοποιούνται για τη μέτρηση της πωλήσεων από τη Skroutz
Third Party
Skroutz
Χρησιμοποιούνται για τη μέτρηση της πωλήσεων από το Facebook
Third Party
Facebook
Μπορείτε να ρυθμίσετε τον περιηγητή σας να μπλοκάρει ή να σας προειδοποιεί για αυτά τα cookies, αλλά κάποια μέρη της ιστοσελίδας δεν θα δουλεύουν σωστά.